Forumlar > Pardus > Donanım > Ağ Donanımı (Kablosuz Ağ Problemi Broadcom)
f4r2an kullanıcısının resmi

f4r2an

Kayıt: 25/04/2012

Kablosuz Ağ Problemi Broadcom

Merhaba Arkadaşlar Ben 2 Senedir Bu Problemi Yaşıyorum. Tekrar Denemek İçin Kurdum Yine Aynı Sorun Var Resimlerden Anlarsınız

 

 

 

Gordugunuz gibi kablosuz kısmına tıklanmıyor

 

lspci

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 310M] (rev a2)
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
06:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.37.6 (pardus@buildfarm) (gcc version 4.5.2 (Pardus Linux) ) #1 SMP Wed Mar 30 15:28:53 EEST 2011
[    0.000000] Command line: root=UUID=bb5333f9-6a21-40f8-b69e-e6872f7c0ea6 splash quiet blacklist=nouveau
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[    0.000000]  BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf681000 (usable)
[    0.000000]  BIOS-e820: 00000000bf681000 - 00000000bf6bf000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf6bf000 - 00000000bf758000 (usable)
[    0.000000]  BIOS-e820: 00000000bf758000 - 00000000bf7bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf7bf000 - 00000000bf7e2000 (usable)
[    0.000000]  BIOS-e820: 00000000bf7e2000 - 00000000bf7ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[    0.000000]  BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: LENOVO 20060                           /Base Board Product Name, BIOS 29CN31WW(V2.08) 09/07/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 base 138000000 mask FF8000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[    0.000000]  0000000000 - 00bf800000 page 2M
[    0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[    0.000000]  0100000000 - 0138000000 page 2M
[    0.000000] kernel direct mapping tables up to 138000000 @ bf7dc000-bf7e2000
[    0.000000] RAMDISK: 37707000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 00000000bf7fe120 00084 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v04 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 00000000bf7ee000 0ADEC (v02 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 00000000bf76a000 00040
[    0.000000] ACPI: ASF! 00000000bf7fd000 000A5 (v32 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 00000000bf7fa000 0008C (v02 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 00000000bf7ed000 00176 (v01 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 00000000bf7ea000 00028 (v01 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 00000000bf7e6000 00034 (v04 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: WDRT 00000000bf7e5000 00047 (v01 INTEL  Calpella 00000000 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000bf7e4000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000bf7e3000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000bf7e2000 0049F (v01  PmRef    ApTst 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000138000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[    0.000000]   NODE_DATA [0000000137fec000 - 0000000137ffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880134000000-ffff8801377fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00138000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000bf681
[    0.000000]     0: 0x000bf6bf -> 0x000bf758
[    0.000000]     0: 0x000bf7bf -> 0x000bf7e2
[    0.000000]     0: 0x000bf7ff -> 0x000bf800
[    0.000000]     0: 0x00100000 -> 0x00138000
[    0.000000] On node 0 totalpages: 1013451
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3919 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 765814 pages, LIFO batch:31
[    0.000000]   Normal zone: 3136 pages used for memmap
[    0.000000]   Normal zone: 226240 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf681000 - 00000000bf6bf000
[    0.000000] PM: Registered nosave memory: 00000000bf758000 - 00000000bf7bf000
[    0.000000] PM: Registered nosave memory: 00000000bf7e2000 - 00000000bf7ff000
[    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[    0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[    0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bf400000 s83648 r8192 d22848 u262144
[    0.000000] pcpu-alloc: s83648 r8192 d22848 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 995973
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=UUID=bb5333f9-6a21-40f8-b69e-e6872f7c0ea6 splash quiet blacklist=nouveau
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3906780k/5111808k available (4661k kernel code, 1058004k absent, 147024k reserved, 6726k data, 720k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 40632320 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 2527.461 MHz processor.
[    0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.92 BogoMIPS (lpj=2527461)
[    0.000013] pid_max: default: 32768 minimum: 301
[    0.000035] Security Framework initialized
[    0.000039] AppArmor: AppArmor disabled by boot time parameter
[    0.000417] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001460] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001856] Mount-cache hash table entries: 256
[    0.001987] Initializing cgroup subsys ns
[    0.001990] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.001992] Initializing cgroup subsys cpuacct
[    0.001997] Initializing cgroup subsys memory
[    0.002009] Initializing cgroup subsys devices
[    0.002011] Initializing cgroup subsys freezer
[    0.002013] Initializing cgroup subsys net_cls
[    0.002015] Initializing cgroup subsys blkio
[    0.002044] CPU: Physical Processor ID: 0
[    0.002045] CPU: Processor Core ID: 0
[    0.002052] mce: CPU supports 9 MCE banks
[    0.002062] CPU0: Thermal monitoring enabled (TM1)
[    0.002069] using mwait in idle threads.
[    0.002071] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.002077] ... version:                3
[    0.002079] ... bit width:              48
[    0.002080] ... generic registers:      4
[    0.002081] ... value mask:             0000ffffffffffff
[    0.002082] ... max period:             000000007fffffff
[    0.002083] ... fixed-purpose events:   3
[    0.002085] ... event mask:             000000070000000f
[    0.002468] ACPI: Core revision 20101013
[    0.185162] Setting APIC routing to flat
[    0.185563] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.195562] CPU0: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz stepping 05
[    0.648960] APIC calibration not consistent with PM-Timer: 451ms instead of 100ms
[    0.648962] APIC delta adjusted to PM-Timer: 831392 (3757848)
[    0.649146] Booting Node   0, Processors  #1 #2 #3
[    0.921959] Brought up 4 CPUs
[    0.921962] Total of 4 processors activated (20217.97 BogoMIPS).
[    0.923800] devtmpfs: initialized
[    0.928112] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.928115] regulator: core version 0.5
[    0.928150] regulator: dummy:
[    0.928187] NET: Registered protocol family 16
[    0.928295] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.928297] ACPI: bus type pci registered
[    0.928388] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.928391] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.961468] PCI: Using configuration type 1 for base access
[    0.962298] bio: create slab <bio-0> at 0
[    0.964930] ACPI: EC: Look up EC in DSDT
[    0.967443] ACPI: Executed 1 blocks of module-level executable AML code
[    0.977879] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.978967] ACPI: SSDT 00000000bf691918 00424 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.979569] ACPI: Dynamic OEM Table Load:
[    0.979571] ACPI: SSDT           (null) 00424 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.979947] ACPI: SSDT 00000000bf68f618 005CD (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.980529] ACPI: Dynamic OEM Table Load:
[    0.980531] ACPI: SSDT           (null) 005CD (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.985417] ACPI: SSDT 00000000bf690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.986107] ACPI: Dynamic OEM Table Load:
[    0.986109] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.990075] ACPI: SSDT 00000000bf68ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.990720] ACPI: Dynamic OEM Table Load:
[    0.990722] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    1.001911] ACPI: Interpreter enabled
[    1.001917] ACPI: (supports S0 S3 S4 S5)
[    1.001960] ACPI: Using IOAPIC for interrupt routing
[    1.043363] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[    1.043387] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[    1.043494] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[    1.047153] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.047429] ACPI: No dock devices found.
[    1.047431] HEST: Table not found.
[    1.047433] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.048282] \_SB_.PCI0:_OSC invalid UUID
[    1.048283] _OSC request data:1 8 1f
[    1.048286] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.049788] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.049791] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.049793] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.049795] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
[    1.049809] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    1.049841] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    1.049865] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.049868] pci 0000:00:01.0: PME# disabled
[    1.049914] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    1.049942] pci 0000:00:16.0: reg 10: [mem 0xdb106100-0xdb10610f 64bit]
[    1.050017] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.050022] pci 0000:00:16.0: PME# disabled
[    1.050062] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    1.050469] pci 0000:00:1a.0: reg 10: [mem 0xdb105c00-0xdb105fff]
[    1.052799] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.052804] pci 0000:00:1a.0: PME# disabled
[    1.052833] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    1.052854] pci 0000:00:1b.0: reg 10: [mem 0xdb100000-0xdb103fff 64bit]
[    1.052929] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.052934] pci 0000:00:1b.0: PME# disabled
[    1.052957] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    1.053035] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.053040] pci 0000:00:1c.0: PME# disabled
[    1.053065] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    1.053142] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.053146] pci 0000:00:1c.1: PME# disabled
[    1.053173] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    1.053249] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.053254] pci 0000:00:1c.2: PME# disabled
[    1.053281] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[    1.053357] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.053361] pci 0000:00:1c.4: PME# disabled
[    1.053397] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    1.053795] pci 0000:00:1d.0: reg 10: [mem 0xdb105800-0xdb105bff]
[    1.056131] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.056135] pci 0000:00:1d.0: PME# disabled
[    1.056159] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    1.056233] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    1.056351] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    1.056377] pci 0000:00:1f.2: reg 10: [io  0x6048-0x604f]
[    1.056388] pci 0000:00:1f.2: reg 14: [io  0x6054-0x6057]
[    1.056399] pci 0000:00:1f.2: reg 18: [io  0x6040-0x6047]
[    1.056410] pci 0000:00:1f.2: reg 1c: [io  0x6050-0x6053]
[    1.056420] pci 0000:00:1f.2: reg 20: [io  0x6020-0x603f]
[    1.056432] pci 0000:00:1f.2: reg 24: [mem 0xdb105000-0xdb1057ff]
[    1.056478] pci 0000:00:1f.2: PME# supported from D3hot
[    1.056482] pci 0000:00:1f.2: PME# disabled
[    1.056504] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    1.056525] pci 0000:00:1f.3: reg 10: [mem 0xdb106000-0xdb1060ff 64bit]
[    1.056554] pci 0000:00:1f.3: reg 20: [io  0x6000-0x601f]
[    1.056598] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    1.056625] pci 0000:00:1f.6: reg 10: [mem 0xdb104000-0xdb104fff 64bit]
[    1.056739] pci 0000:01:00.0: [10de:0a70] type 0 class 0x000300
[    1.056751] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[    1.056764] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.056780] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    1.056789] pci 0000:01:00.0: reg 24: [io  0x5000-0x507f]
[    1.056798] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[    1.056853] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[    1.056865] pci 0000:01:00.1: reg 10: [mem 0xd3000000-0xd3003fff]
[    1.056951] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.056954] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    1.056956] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    1.056959] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.057014] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[    1.057019] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    1.057023] pci 0000:00:1c.0:   bridge window [mem 0xda100000-0xdb0fffff]
[    1.057031] pci 0000:00:1c.0:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    1.057154] pci 0000:06:00.0: [14e4:4727] type 0 class 0x000280
[    1.057197] pci 0000:06:00.0: reg 10: [mem 0xd9100000-0xd9103fff 64bit]
[    1.057374] pci 0000:06:00.0: supports D1 D2
[    1.057375] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    1.057387] pci 0000:06:00.0: PME# disabled
[    1.057435] pci 0000:00:1c.1: PCI bridge to [bus 06-06]
[    1.057440] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    1.057445] pci 0000:00:1c.1:   bridge window [mem 0xd9100000-0xda0fffff]
[    1.057452] pci 0000:00:1c.1:   bridge window [mem 0xd4100000-0xd50fffff 64bit pref]
[    1.057575] pci 0000:07:00.0: [10ec:8136] type 0 class 0x000200
[    1.057595] pci 0000:07:00.0: reg 10: [io  0x2000-0x20ff]
[    1.057708] pci 0000:07:00.0: reg 18: [mem 0xd5110000-0xd5110fff 64bit pref]
[    1.057781] pci 0000:07:00.0: reg 20: [mem 0xd5100000-0xd510ffff 64bit pref]
[    1.057827] pci 0000:07:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    1.057979] pci 0000:07:00.0: supports D1 D2
[    1.057981] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.057995] pci 0000:07:00.0: PME# disabled
[    1.058082] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[    1.058086] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    1.058091] pci 0000:00:1c.2:   bridge window [mem 0xd8100000-0xd90fffff]
[    1.058098] pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd60fffff 64bit pref]
[    1.058154] pci 0000:00:1c.4: PCI bridge to [bus 08-0b]
[    1.058158] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[    1.058163] pci 0000:00:1c.4:   bridge window [mem 0xd7100000-0xd80fffff]
[    1.058171] pci 0000:00:1c.4:   bridge window [mem 0xd6100000-0xd70fffff 64bit pref]
[    1.058243] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[    1.058248] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.058252] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.058260] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.058262] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.058264] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.058266] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.058268] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[    1.058302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.058501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    1.058550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.058670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.058717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.058774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    1.058832] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    1.058960] \_SB_.PCI0:_OSC invalid UUID
[    1.058961] _OSC request data:1 19 1f
[    1.069624] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    1.069727] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[    1.069744] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    1.069762] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    1.069781] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    1.069797] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    1.069812] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    1.070108] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    1.070182] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.070255] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.070328] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.070403] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.070475] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.070546] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.070618] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    1.070732] SCSI subsystem initialized
[    1.070785] libata version 3.00 loaded.
[    1.070846] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.070850] vgaarb: loaded
[    1.070874] usbcore: registered new interface driver usbfs
[    1.070887] usbcore: registered new interface driver hub
[    1.070911] usbcore: registered new device driver usb
[    1.070993] PCI: Using ACPI for IRQ routing
[    1.070995] PCI: pci_cache_line_size set to 64 bytes
[    1.071139] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[    1.071141] reserve RAM buffer: 00000000bf681000 - 00000000bfffffff
[    1.071144] reserve RAM buffer: 00000000bf758000 - 00000000bfffffff
[    1.071146] reserve RAM buffer: 00000000bf7e2000 - 00000000bfffffff
[    1.071148] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[    1.071242] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.071247] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.073271] Switching to clocksource tsc
[    1.074651] pnp: PnP ACPI init
[    1.074667] ACPI: bus type pnp registered
[    1.075443] pnp 00:00: [bus 00-fe]
[    1.075446] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.075448] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.075450] pnp 00:00: [io  0x0d00-0xffff window]
[    1.075452] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.075453] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.075455] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.075457] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.075459] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.075460] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.075462] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.075464] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.075466] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.075467] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.075469] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.075471] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.075474] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.075476] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.075478] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[    1.075480] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.075537] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.094800] pnp 00:01: [io  0x0000-0x001f]
[    1.094805] pnp 00:01: [io  0x0081-0x0091]
[    1.094809] pnp 00:01: [io  0x0093-0x009f]
[    1.094815] pnp 00:01: [io  0x00c0-0x00df]
[    1.094820] pnp 00:01: [dma 4]
[    1.094882] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.094891] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.094918] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.095047] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.095075] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.095086] pnp 00:04: [io  0x00f0]
[    1.095095] pnp 00:04: [irq 13]
[    1.095124] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.095135] pnp 00:05: [io  0x002e-0x002f]
[    1.095137] pnp 00:05: [io  0x004e-0x004f]
[    1.095138] pnp 00:05: [io  0x0061]
[    1.095140] pnp 00:05: [io  0x0063]
[    1.095141] pnp 00:05: [io  0x0065]
[    1.095142] pnp 00:05: [io  0x0067]
[    1.095144] pnp 00:05: [io  0x0068-0x006f]
[    1.095145] pnp 00:05: [io  0x0070]
[    1.095147] pnp 00:05: [io  0x0080]
[    1.095148] pnp 00:05: [io  0x0092]
[    1.095150] pnp 00:05: [io  0x00b2-0x00b3]
[    1.095151] pnp 00:05: [io  0x0680-0x069f]
[    1.095153] pnp 00:05: [io  0x0800-0x080f]
[    1.095154] pnp 00:05: [io  0xffff]
[    1.095156] pnp 00:05: [io  0xffff]
[    1.095157] pnp 00:05: [io  0x0400-0x047f]
[    1.095159] pnp 00:05: [io  0x0500-0x057f]
[    1.095160] pnp 00:05: [io  0x164e-0x164f]
[    1.095172] pnp 00:05: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 7 [io  0x1000-0x1fff]
[    1.095212] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.095221] pnp 00:06: [io  0x0070-0x0077]
[    1.095226] pnp 00:06: [irq 8]
[    1.095252] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.095329] pnp 00:07: [irq 12]
[    1.095359] pnp 00:07: Plug and Play ACPI device, IDs SYN0728 SYN0700 SYN0002 PNP0f13 (active)
[    1.095391] pnp 00:08: [io  0x0060]
[    1.095393] pnp 00:08: [io  0x0064]
[    1.095398] pnp 00:08: [irq 1]
[    1.095431] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.096154] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    1.096157] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[    1.096158] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    1.096160] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    1.096161] pnp 00:09: [mem 0xe0000000-0xefffffff]
[    1.096165] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    1.096167] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[    1.096168] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[    1.096170] pnp 00:09: [mem 0xff000000-0xffffffff]
[    1.096171] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    1.096173] pnp 00:09: [mem 0xdb200000-0xdb200fff]
[    1.096235] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.096453] pnp 00:0a: [bus ff]
[    1.096496] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.096510] pnp: PnP ACPI: found 11 devices
[    1.096511] ACPI: ACPI bus type pnp unregistered
[    1.096520] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.096523] system 00:05: [io  0x0800-0x080f] has been reserved
[    1.096525] system 00:05: [io  0xffff] has been reserved
[    1.096527] system 00:05: [io  0xffff] has been reserved
[    1.096529] system 00:05: [io  0x0400-0x047f] has been reserved
[    1.096531] system 00:05: [io  0x0500-0x057f] has been reserved
[    1.096537] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.096539] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.096541] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.096544] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.096546] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    1.096548] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.096551] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.096553] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    1.096555] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.096558] system 00:09: [mem 0xdb200000-0xdb200fff] has been reserved
[    1.102530] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    1.102534] pci 0000:07:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    1.102588] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[    1.102591] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.102593] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    1.102596] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    1.102598] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.102602] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[    1.102605] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    1.102611] pci 0000:00:1c.0:   bridge window [mem 0xda100000-0xdb0fffff]
[    1.102616] pci 0000:00:1c.0:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    1.102623] pci 0000:00:1c.1: PCI bridge to [bus 06-06]
[    1.102627] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    1.102633] pci 0000:00:1c.1:   bridge window [mem 0xd9100000-0xda0fffff]
[    1.102638] pci 0000:00:1c.1:   bridge window [mem 0xd4100000-0xd50fffff 64bit pref]
[    1.102646] pci 0000:07:00.0: BAR 6: assigned [mem 0xd5120000-0xd513ffff pref]
[    1.102648] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[    1.102651] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    1.102657] pci 0000:00:1c.2:   bridge window [mem 0xd8100000-0xd90fffff]
[    1.102662] pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd60fffff 64bit pref]
[    1.102669] pci 0000:00:1c.4: PCI bridge to [bus 08-0b]
[    1.102672] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[    1.102678] pci 0000:00:1c.4:   bridge window [mem 0xd7100000-0xd80fffff]
[    1.102683] pci 0000:00:1c.4:   bridge window [mem 0xd6100000-0xd70fffff 64bit pref]
[    1.102690] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[    1.102692] pci 0000:00:1e.0:   bridge window [io  disabled]
[    1.102697] pci 0000:00:1e.0:   bridge window [mem disabled]
[    1.102702] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    1.102719] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.102722] pci 0000:00:01.0: setting latency timer to 64
[    1.102732] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.102736] pci 0000:00:1c.0: setting latency timer to 64
[    1.102744] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.102752] pci 0000:00:1c.1: setting latency timer to 64
[    1.102762] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.102767] pci 0000:00:1c.2: setting latency timer to 64
[    1.102774] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.102778] pci 0000:00:1c.4: setting latency timer to 64
[    1.102786] pci 0000:00:1e.0: setting latency timer to 64
[    1.102790] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.102792] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.102794] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.102796] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[    1.102798] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    1.102799] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[    1.102801] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.102804] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    1.102806] pci_bus 0000:02: resource 1 [mem 0xda100000-0xdb0fffff]
[    1.102808] pci_bus 0000:02: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref]
[    1.102810] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    1.102812] pci_bus 0000:06: resource 1 [mem 0xd9100000-0xda0fffff]
[    1.102814] pci_bus 0000:06: resource 2 [mem 0xd4100000-0xd50fffff 64bit pref]
[    1.102816] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    1.102818] pci_bus 0000:07: resource 1 [mem 0xd8100000-0xd90fffff]
[    1.102819] pci_bus 0000:07: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref]
[    1.102821] pci_bus 0000:08: resource 0 [io  0x1000-0x1fff]
[    1.102823] pci_bus 0000:08: resource 1 [mem 0xd7100000-0xd80fffff]
[    1.102825] pci_bus 0000:08: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref]
[    1.102827] pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7]
[    1.102829] pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff]
[    1.102830] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[    1.102832] pci_bus 0000:0c: resource 7 [mem 0xc0000000-0xfeafffff]
[    1.102863] NET: Registered protocol family 2
[    1.103003] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.104003] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.105702] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.105917] TCP: Hash tables configured (established 524288 bind 65536)
[    1.105920] TCP reno registered
[    1.105930] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.105951] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.106075] NET: Registered protocol family 1
[    1.127805] pci 0000:01:00.0: Boot video device
[    1.127884] PCI: CLS 64 bytes, default 64
[    1.127928] Unpacking initramfs...
[    1.293804] Freeing initrd memory: 9124k freed
[    1.295822] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.295827] Placing 64MB software IO TLB between ffff8800bb400000 - ffff8800bf400000
[    1.295829] software IO TLB at phys 0xbb400000 - 0xbf400000
[    1.295876] Simple Boot Flag at 0x44 set to 0x1
[    1.296450] audit: initializing netlink socket (disabled)
[    1.296460] type=2000 audit(1335375681.622:1): initialized
[    1.315144] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.316725] VFS: Disk quotas dquot_6.5.2
[    1.316772] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.317205] Registering unionfs 2.5.7 (for 2.6.37-rc1)
[    1.317331] fuse init (API version 7.15)
[    1.317548] aufs 2.1-37
[    1.317552] msgmni has been set to 7648
[    1.317880] alg: No test for stdrng (krng)
[    1.317974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.317998] io scheduler noop registered
[    1.317999] io scheduler deadline registered
[    1.318038] io scheduler cfq registered (default)
[    1.318137] pcieport 0000:00:01.0: setting latency timer to 64
[    1.318164] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.318251] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.318271] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.318350] intel_idle: MWAIT substates: 0x1120
[    1.318352] intel_idle: v0.4 model 0x25
[    1.318353] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.321740] ACPI: AC Adapter [ACAD] (on-line)
[    1.321860] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0C:00/input/input0
[    1.321865] ACPI: Power Button [PWRB]
[    1.321904] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0E:00/input/input1
[    1.321906] ACPI: Sleep Button [SLPB]
[    1.321943] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0D:00/input/input2
[    1.321995] ACPI: Lid Switch [LID0]
[    1.322075] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.322078] ACPI: Power Button [PWRF]
[    1.322330] ACPI: acpi_idle yielding to intel_idle
[    1.348837] ACPI: Invalid active0 threshold
[    1.350768] thermal LNXTHERM:00: registered as thermal_zone0
[    1.350770] ACPI: Thermal Zone [TZ00] (68 C)
[    1.350806] ERST: Table is not found!
[    1.350808] XENFS: not registering filesystem on non-xen platform
[    1.483828] ACPI: Battery Slot [BAT1] (battery present)
[    1.483957] Linux agpgart interface v0.103
[    1.484065] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.504271] loop: module loaded
[    1.504280] st: Version 20100829, fixed bufsize 32768, s/g segs 256
[    1.504371] Fixed MDIO Bus: probed
[    1.504392] console [netcon0] enabled
[    1.504393] netconsole: network logging started
[    1.504404] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.504422] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.504441] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.504445] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.504461] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.508704] ehci_hcd 0000:00:1a.0: debug port 2
[    1.512624] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.512641] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdb105c00
[    1.522665] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.522685] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.522687] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.522689] usb usb1: Product: EHCI Host Controller
[    1.522691] usb usb1: Manufacturer: Linux 2.6.37.6 ehci_hcd
[    1.522692] usb usb1: SerialNumber: 0000:00:1a.0
[    1.522783] hub 1-0:1.0: USB hub found
[    1.522787] hub 1-0:1.0: 3 ports detected
[    1.522855] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.522868] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.522871] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.522877] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.527690] ehci_hcd 0000:00:1d.0: debug port 2
[    1.531611] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.531623] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdb105800
[    1.541653] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.541672] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.541674] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.541676] usb usb2: Product: EHCI Host Controller
[    1.541678] usb usb2: Manufacturer: Linux 2.6.37.6 ehci_hcd
[    1.541679] usb usb2: SerialNumber: 0000:00:1d.0
[    1.541752] hub 2-0:1.0: USB hub found
[    1.541756] hub 2-0:1.0: 3 ports detected
[    1.541815] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.541826] uhci_hcd: USB Universal Host Controller Interface driver
[    1.541907] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS2] at 0x60,0x64 irq 1,12
[    1.557527] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.557533] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.557614] mice: PS/2 mouse device common for all mice
[    1.557771] rtc_cmos 00:06: RTC can wake from S4
[    1.561712] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.561748] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.561878] cpuidle: using governor ladder
[    1.562026] cpuidle: using governor menu
[    1.562230] usbcore: registered new interface driver usbhid
[    1.562232] usbhid: USB HID core driver
[    1.562249] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    1.562263] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.562412] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[    1.562569] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    1.562987] NET: Registered protocol family 10
[    1.563381] lo: Disabled Privacy Extensions
[    1.563600] NET: Registered protocol family 17
[    1.563615] Registering the dns_resolver key type
[    1.564784] registered taskstats version 1
[    1.565303] rtc_cmos 00:06: setting system clock to 2012-04-25 17:41:23 UTC (1335375683)
[    1.565409] Freeing unused kernel memory: 720k freed
[    1.565537] Write protecting the kernel read-only data: 10240k
[    1.565885] Freeing unused kernel memory: 1464k freed
[    1.566344] Freeing unused kernel memory: 1724k freed
[    1.568018] initramfs: Starting init on initramfs
[    1.572053] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.575874] initramfs: Loading KMS driver
[    1.659607] uvesafb: NVIDIA Corporation, GT218 Board - 0696a700, Chip Rev   , OEM: NVIDIA, VBE v3.0
[    1.724893] uvesafb: VBIOS/hardware doesn't support DDC transfers
[    1.724902] uvesafb: no monitor limits have been set, default refresh rate will be used
[    1.725520] uvesafb: scrolling: redraw
[    1.820082] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.934488] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.934491] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.934935] hub 1-1:1.0: USB hub found
[    1.935067] hub 1-1:1.0: 6 ports detected
[    2.020125] Console: switching to colour frame buffer device 128x48
[    2.037978] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    2.150376] uvesafb: framebuffer at 0xd1000000, mapped to 0xffffc90011100000, using 8160k, total 14336k
[    2.150381] fb0: VESA VGA frame buffer device
[    2.152404] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.152410] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.152971] hub 2-1:1.0: USB hub found
[    2.153125] hub 2-1:1.0: 8 ports detected
[    2.427882] usb 2-1.1: new full speed USB device using ehci_hcd and address 3
[    2.518625] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0745
[    2.518628] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.518631] usb 2-1.1: Product: Microsoft® Nano Transceiver v2.0
[    2.518632] usb 2-1.1: Manufacturer: Microsoft
[    2.530941] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5
[    2.531190] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.1/input0
[    2.536951] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input6
[    2.537354] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.1/input1
[    2.544166] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[    2.553742] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/input/input7
[    2.554434] generic-usb 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.1/input2
[    2.564912] initramfs: Probing PCI devices
[    2.585158] ahci 0000:00:1f.2: version 3.0
[    2.585182] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.585453] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    2.585487] ahci: SSS flag set, parallel bus scan disabled
[    2.585528] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[    2.585531] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[    2.585536] ahci 0000:00:1f.2: setting latency timer to 64
[    2.591073] scsi0 : ahci
[    2.591356] scsi1 : ahci
[    2.591614] scsi2 : ahci
[    2.591910] scsi3 : ahci
[    2.592097] scsi4 : ahci
[    2.592285] ata1: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105100 irq 41
[    2.592290] ata2: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105180 irq 41
[    2.592292] ata3: DUMMY
[    2.592293] ata4: DUMMY
[    2.592296] ata5: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105300 irq 41
[    2.613001] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[    2.617001] usb 2-1.2: new full speed USB device using ehci_hcd and address 4
[    2.702863] usb 2-1.2: not running at top speed; connect to a high speed hub
[    2.705998] usb 2-1.2: New USB device found, idVendor=0402, idProduct=5668
[    2.706004] usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.706009] usb 2-1.2: Product: EM640AB MP3 Player
[    2.706012] usb 2-1.2: Manufacturer: ALi Corp.
[    2.706016] usb 2-1.2: SerialNumber: 91204640100000000491
[    2.780024] usb 2-1.3: new high speed USB device using ehci_hcd and address 5
[    2.886537] usb 2-1.3: New USB device found, idVendor=04f2, idProduct=b18a
[    2.886542] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.886546] usb 2-1.3: Product: Lenovo EasyCamera
[    2.886549] usb 2-1.3: Manufacturer: Chicony Corp.
[    2.896704] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.898802] ata1.00: ATA-8: WDC WD5000BEVT-24A0RT0, 01.01A02, max UDMA/133
[    2.898808] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.901065] ata1.00: configured for UDMA/133
[    2.901275] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BEVT-2 01.0 PQ: 0 ANSI: 5
[    2.902058] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.902199] sd 0:0:0:0: [sda] Write Protect is off
[    2.902206] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.902266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.902442] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.940285]  sda: sda1
[    2.941154] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.960957] usb 2-1.6: new high speed USB device using ehci_hcd and address 6
[    3.059381] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0158
[    3.059386] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.059390] usb 2-1.6: Product: USB2.0-CRW
[    3.059392] usb 2-1.6: Manufacturer: Generic
[    3.059395] usb 2-1.6: SerialNumber: 20071114173400000
[    3.625442] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.627426] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LE09, max UDMA/66
[    3.630073] ata2.00: configured for UDMA/66
[    3.633191] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     LE09 PQ: 0 ANSI: 5
[    3.642359] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.642364] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.642951] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.643388] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.948342] ata5: SATA link down (SStatus 0 SControl 300)
[    3.949679] initramfs: Probing USB devices
[    3.976010] Initializing USB Mass Storage driver...
[    3.976103] scsi5 : usb-storage 2-1.2:1.0
[    3.976555] scsi6 : usb-storage 2-1.6:1.0
[    3.976831] usbcore: registered new interface driver usb-storage
[    3.976833] USB Mass Storage support registered.
[    4.091197] initramfs: Mounting rootfs: /dev/sda1 (ext4)
[    4.185884] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.261426] initramfs: Switching to the real root
[    4.977246] scsi 5:0:0:0: Direct-Access     EM640AB  MP3 Player            PQ: 0 ANSI: 0 CCS
[    4.978491] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    4.979487] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    4.979872] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    4.980600] sd 5:0:0:0: [sdc] 3971072 512-byte logical blocks: (2.03 GB/1.89 GiB)
[    4.981228] sd 5:0:0:0: [sdc] Write Protect is off
[    4.981234] sd 5:0:0:0: [sdc] Mode Sense: 3b 00 00 00
[    4.981238] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[    4.983700] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.984237] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[    4.988973]  sdc: sdc1
[    4.990709] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[    4.990715] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[    6.792054] udev[260]: starting version 166
[    7.488763] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[    7.488773] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[    7.488782] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[    7.488789] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[    7.488851] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    8.016994] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.078799] acpi device:0b: registered as cooling_device4
[    8.079396] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input9
[    8.079455] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.148995] wmi: Mapper loaded
[    8.614673] Linux video capture interface: v2.00
[    8.664499] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b18a)
[    8.666657] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input10
[    8.666712] usbcore: registered new interface driver uvcvideo
[    8.666714] USB Video Class driver (v1.0.Innocent
[    8.809315] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.809348] r8169 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    8.809477] r8169 0000:07:00.0: setting latency timer to 64
[    8.809680] r8169 0000:07:00.0: irq 42 for MSI/MSI-X
[    8.810086] r8169 0000:07:00.0: eth0: RTL8102e at 0xffffc90011aa0000, 88:ae:1d:de:f9:ff, XID 04e00000 IRQ 42
[    9.251467] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[    9.251485] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[    9.251501] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.251578] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    9.251606] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.273513] EXT4-fs (sda1): re-mounted. Opts: (null)
[    9.321972] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.321976] hda_intel: Disable MSI for Nvidia chipset
[    9.322046] HDA Intel 0000:01:00.1: setting latency timer to 64
[    9.794096] EXT4-fs (sda1): re-mounted. Opts: (null)
[   14.661232] comar[704]: segfault at 7f9811d3b0f0 ip 00007f9811d3b0f0 sp 00007fffc0038f68 error 15
[   18.410495] r8169 0000:07:00.0: eth0: link down
[   18.411744] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.196190] nvidia: module license 'NVIDIA' taints kernel.
[   20.196196] Disabling lock debugging due to kernel taint
[   20.724213] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   20.724223] nvidia 0000:01:00.0: power state changed by ACPI to D0
[   20.724232] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.724245] nvidia 0000:01:00.0: setting latency timer to 64
[   20.724250] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   20.724433] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  280.13  Wed Jul 27 16:53:56 PDT 2011
[   31.951129] device-mapper: uevent: version 1.0.3
[   31.951462] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[   31.952859] md: raid0 personality registered for level 0
[   31.955217] md: raid1 personality registered for level 1
[   31.976681] async_tx: api initialized (async)
[   32.019907] raid6: int64x1   1667 MB/s
[   32.036909] raid6: int64x2   1714 MB/s
[   32.053899] raid6: int64x4   1378 MB/s
[   32.070897] raid6: int64x8   1015 MB/s
[   32.087882] raid6: sse2x1    3992 MB/s
[   32.104886] raid6: sse2x2    4667 MB/s
[   32.121848] raid6: sse2x4    5242 MB/s
[   32.121850] raid6: using algorithm sse2x4 (5242 MB/s)
[   32.129913] xor: automatically using best checksumming function: generic_sse
[   32.134810]    generic_sse:  8544.000 MB/sec
[   32.134813] xor: using function: generic_sse (8544.000 MB/sec)
[   32.141383] md: raid6 personality registered for level 6
[   32.141386] md: raid5 personality registered for level 5
[   32.141388] md: raid4 personality registered for level 4
[   32.143578] md: raid10 personality registered for level 10
[  143.902334] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[  160.377981] comar[1509]: segfault at 7fe77ceeb0f0 ip 00007fe77ceeb0f0 sp 00007fff8442d7d8 error 15
[ 1124.567727] r8169 0000:07:00.0: eth0: link up
[ 1124.569546] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1134.799309] eth0: no IPv6 routers present
[ 1175.622119] usb 2-1.2: USB disconnect, address 4
[ 1177.590777] usb 2-1.2: new full speed USB device using ehci_hcd and address 7
[ 1177.676387] usb 2-1.2: not running at top speed; connect to a high speed hub
[ 1177.679442] usb 2-1.2: New USB device found, idVendor=0402, idProduct=5668
[ 1177.679448] usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1177.679470] usb 2-1.2: Product: EM640AB MP3 Player
[ 1177.679476] usb 2-1.2: Manufacturer: ALi Corp.
[ 1177.679481] usb 2-1.2: SerialNumber: 91204640100000000491
[ 1177.680172] scsi7 : usb-storage 2-1.2:1.0
[ 1178.682105] scsi 7:0:0:0: Direct-Access     EM640AB  MP3 Player            PQ: 0 ANSI: 0 CCS
[ 1178.683185] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 1178.683747] sd 7:0:0:0: [sdc] 3971072 512-byte logical blocks: (2.03 GB/1.89 GiB)
[ 1178.685169] sd 7:0:0:0: [sdc] Write Protect is off
[ 1178.685172] sd 7:0:0:0: [sdc] Mode Sense: 3b 00 00 00
[ 1178.685175] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 1178.688257] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 1178.693345]  sdc: sdc1
[ 1178.695364] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 1178.695367] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 1616.078501] r8169 0000:07:00.0: eth0: link down
[ 1617.751976] r8169 0000:07:00.0: eth0: link up
[ 1626.432436] r8169 0000:07:00.0: eth0: link down
[ 1641.068928] r8169 0000:07:00.0: eth0: link up

 

Top
PHoeniX kullanıcısının resmi

PHoeniX

Kayıt: 09/12/2010

Re: Kablosuz Ağ Problemi Broadcom

Kablosuz ağ kartın Pardus GNU/Linux tarafında tanınmamış, gerekli olan modulun el ile derlenmesi gerekli.

http://tr.pardus-wiki.org/Donan%C4%B1m:Realtek_RTL8180CUS_Kablosuz_USB_A...
Buradakini temel alarak sürücü (aslında modul) indirip maddeyi referans alarak yapabilirsin.

Yada bir süre ben kendi sistemimde derleyip yazana kadar beklemen gerekli...

Top
PHoeniX kullanıcısının resmi

PHoeniX

Kayıt: 09/12/2010

Re: Kablosuz Ağ Problemi Broadcom

http://tr.pardus-wiki.org/Donan%C4%B1m:Broadcom_BCM4313 olarak bir madde açtım wiki de...

Bu şekilde modul bende çalıştı. Eğer sıkıntı olursa yukarda gönderdiğin gibi dmesg ve iwconfig çıktılarını alalım...

Top
f4r2an kullanıcısının resmi

f4r2an

Kayıt: 25/04/2012

Re: Kablosuz Ağ Problemi Broadcom

Ben biraz daha beklemeyi dusunuyorum hala pardus için erken diye dusunuyorum acıkcası yeni surumunde yetkılı kısıler sorunları duzeltırse sureklı olarak geçmeyi dusunuyorum Smile

Top
PHoeniX kullanıcısının resmi

PHoeniX

Kayıt: 09/12/2010

Re: Kablosuz Ağ Problemi Broadcom

İşte düzelttim sana nasıl yükleneceği ile ilgili bir makale yazdım...

Sorun nerede?

Sonuçta Winzortun da desteklemediği sürücüleri el ile yüklemen gerekiyor... Pardus'un bu konu hakkında bir sorunu yok...

Top